Mixing plant with precise controlMischanlage elktronisch gesteuert
Mixing plant with precise control
Mischanlage elktronisch gesteuert
VB plusz ÁFA-val
38 500 EUR
Gyártási év
2023
Állapot
Használt
Helyszín
Havelsee 

Alapadatok
- Gépmegnevezés:
- Mixing plant with precise control
- Gyártási év:
- 2023
- Állapot:
- szinte új (használt)
- Üzemórák:
- 500 h
Ár és helyszín
VB plusz ÁFA-val
38 500 EUR
- Helyszín:
- Havelsee, Németország

Hívás
Műszaki adatok
Etetőtálcák száma:
2
Ajánlat részletei
- Hirdetés azonosító:
- A22368807
- Frissítés:
- utoljára ekkor: 21.07.2026
Leírás
Scope of supply of the system
The offer includes:
1. Mixer
• Concrete mixer with a capacity of 9 m³.
• Mixer screw inside the mixer has been renewed and reinforced.
• The mixer is driven by a powerful electric motor.
• The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed.
Dodpfxszmyvio Amgokw
2. Trough screw conveyor 1
• Conveying system for feeding the mixer.
3. Trough screw conveyor 2
• Conveying system for discharging the finished mixed material.
4. Liquid feed
• Dosing of liquid components via a pumping system from Flux.
5. Electronic control
• Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer.
Mode of operation
• The mixer is installed on load cells. The current material weight is displayed on the display at all times.
• For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg).
• The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags.
• Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached.
• After that, the feed is stopped via the trough screw conveyor.
• The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes.
• After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on.
• The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader).
Mixing process based on weight percentages
1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste.
2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added.
3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose.
Optionally, the push-off trailer/manure spreader can be purchased.
A hirdetés automatikusan lett lefordítva. Fordítási hibák előfordulhatnak.
The offer includes:
1. Mixer
• Concrete mixer with a capacity of 9 m³.
• Mixer screw inside the mixer has been renewed and reinforced.
• The mixer is driven by a powerful electric motor.
• The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed.
Dodpfxszmyvio Amgokw
2. Trough screw conveyor 1
• Conveying system for feeding the mixer.
3. Trough screw conveyor 2
• Conveying system for discharging the finished mixed material.
4. Liquid feed
• Dosing of liquid components via a pumping system from Flux.
5. Electronic control
• Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer.
Mode of operation
• The mixer is installed on load cells. The current material weight is displayed on the display at all times.
• For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg).
• The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags.
• Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached.
• After that, the feed is stopped via the trough screw conveyor.
• The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes.
• After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on.
• The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader).
Mixing process based on weight percentages
1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste.
2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added.
3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose.
Optionally, the push-off trailer/manure spreader can be purchased.
A hirdetés automatikusan lett lefordítva. Fordítási hibák előfordulhatnak.
Dokumentumok
Szállító
Megjegyzés: Regisztráljon ingyenesen vagy jelentkezzen be, hogy hozzáférjen minden információhoz.
Regisztrált ekkor: 2021
1 Hirdetés online
Ajánlatkérés elküldése
Telefon & Fax
+49 8191 ... hirdetések
Ezek a hirdetések is felkelthetik az érdeklődését.
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Linschoten
1 177 km
Betonkeverő
12m3 stationaire betonmixer4Rent
12m3 stationaire betonmixer4Rent
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Wartenberg
579 km
Kétrészes csillagképernyő
Anlagenbau GüntherMULTISTAR ONE / MS ONE
Anlagenbau GüntherMULTISTAR ONE / MS ONE
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Berlin
738 km
Ikercsavaros tartály
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Bad Langensalza
778 km
Udvari rakodó
ManitouMLA 2-25 H
ManitouMLA 2-25 H
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Gmunden
436 km
Szélszűrő tartozék
TUKWINDPRO 18
TUKWINDPRO 18
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Sinsheim
820 km
Ploughshare mixer használt
MAPWBHP 15000
MAPWBHP 15000
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Oberleichtersbach
792 km
Átvilágító üzem
Metso2PP 7000/2250
Metso2PP 7000/2250
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Temse
1 196 km
Zsákolóüzem
CONCETTIIPF 25
CONCETTIIPF 25
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Polków-Sagały
597 km
Raklapváltó forgatható
PREMIERV CHANGER
PREMIERV CHANGER
Sikeres
Üzenetét elküldtük.
Apróhirdetés
Bad Salzungen
794 km
Csillagszita ESS
Butzer - EVRESS
Butzer - EVRESS
A hirdetése sikeresen törölve lett
Hiba történt














































































